Operation Manual

20
Delete all answering messages
1. Press MENU button. Scroll ▲ or ▼ button to select ANSW MACHINE.
2. Press OK button. Scroll ▲ or ▼ button to select DELETE ALL.
3. Press OK button. The display shows CONFIRM? Press OK button then all old the messages will be deleted. The
new messages can’t be deleted.
Ring delay
Ring delay sets the number of times your product will ring before the answering machine picks up your call and
starts playing the outgoing message.
You can change this setting to between 2-7 rings or economy. The default setting is 5 rings.
1. Press MENU button. Scroll ▲ or ▼ button to select ANSW MACHINE.
2. Press OK button. Scroll ▲ or ▼ button to select SETTINGS.
3. Press OK button. Scroll ▲ or ▼ button to select RING DELAY.
4. Press OK button. Scroll ▲ or ▼ button to select the number of rings required and press OK button to confirm.
Economy
When you call from another phone to access your messages remotely, if your answering machine is set to
Economy, and you have new messages it will answer after 3 rings, if you do not have any new messages, it will
ring after 5 rings. This means you can hang up after 3 rings knowing you have no new messages, saving you time
and the cost of the call.
Remote access
You can operate your answering machine from other phone by calling your phone and entering the TAM PIN
code (default as 0000). Using a PIN code prevents other people from accessing your answer machine and
messages without permission.
To check the answering machine message remotely, please make sure MENU> ANSWERING MACHINE >
SETTINGS > REMOTE is activated.
1. Dial your telephone number. When you hear your outgoing message, press # button and enter the PIN code
quickly. The TAM messages will be played.
a. If the security code is correct, the new answering messages will be played from the latest received one to
the oldest.
b. If you enter an incorrect PIN code or there is no message, you will hear a prompt sound and the phone
will be disconnected after few seconds.
2. When messages are playing. Simply follow the instruction as indicated below:
 Press 1 to skip back to the previous message.
 Press 2 to restart the current message.
 Press 3 to skip forward to the next message
 Press 6 to delete current playing message.
 Press 8 to stop playback
When in the remote control while not playing messages, you can press keys for below functions:
 Press 7 to switch the answer machine ON
 Press 9 to switch the answer machine OFF
Select a language for answering machine
1. Press MENU button. Scroll ▲ or ▼ button to select ANSW MACHINE.
2. Press OK button. Scroll ▲ or ▼ button to select SETTINGS.
3. Press OK button. Scroll ▲ or ▼ button to select LANGUAGE.
4. Press OK button. Scroll ▲ or ▼ button to select the OGM language (French, English, German and Dutch).