Installation Instructions

Table Of Contents
eth Commands
E-DOC-CTC-20071119-0004 v1.0
247
eth bridge xtratag list Display all extra tag mapping entries. see page 294
eth device ifconfig Configure ethernet interface. see page 295
eth device iflist Show status of ethernet interfaces. see page 296
eth flush Flush all ETH interfaces. see page 297
eth ifadd Create a new ETH interface. see page 298
eth ifattach Attach an ETH interface. see page 299
eth ifconfig Modify an ETH interface. see page 300
eth ifdelete Delete an ETH interface. see page 301
eth ifdetach Detach an ETH interface. see page 302
eth iflist Display the ETH interfaces. see page 303
eth switch group flush To set all ports to the default settings
(all ports in group 0).
see page 304
eth switch group list List all configured groups. see page 305
eth switch group move Move a specified port to a specified
group.
see page 306
eth switch info Display switch capabilities see page 307
eth switch mirror capture Define the specified port to be the
Mirror Capture Port.
see page 308
eth switch mirror egress Enable or disable the specified port to
be a Transmitted Port Mirroring.
see page 309
eth switch mirror ingress Enable or disable the specified port to
be a Received Port Mirroring.
see page 310
eth switch qos config Configure common qos parameters. see page 311
eth switch qos ifconfig Configure per port qos parameters. see page 312
eth switch qos list Display qos configuration. see page 313
eth switch qos weights Configure the queue weights. see page 314
eth switch shaper config Configure common ingress shaper
parameters.
see page 315
eth switch shaper ifconfig Configure per port shaper
parameters.
see page 316
eth switch shaper iflist Display shaper configuration per port. see page 317
eth switch share add Add a port to be shared. see page 318
eth switch share delete Delete a shared port. see page 319