Installation Instructions

Table Of Contents
eth Commands
E-DOC-CTC-20071119-0004 v1.0
251
eth bridge config
Modify/Display the bridge configuration settings.
SYNTAX:
eth bridge config [brname = <{bridge}]>
[age = <number{10-1000000}]>
[filter = <{none|no_WAN_broadcast}]>
[vlan = <{disabled|enabled}]>
[precedencemap = <string]>
where:
brname The name of a bridge instance. OPTIONAL
age The lifetime (in seconds) of a dynamically
learned MAC address.
OPTIONAL
filter The bridge filter to be applied for all WAN bridge
interfaces.
OPTIONAL
vlan Enable/disable the use of the VLAN id of the
received VLAN packets.
OPTIONAL
precedencemap The IP QoS precedence mapping table. OPTIONAL