Installation Instructions

Table Of Contents
eth Commands
286
E-DOC-CTC-20071119-0004 v1.0
eth bridge vlan ifadd
Add bridge interface to virtual LAN.
SYNTAX:
eth bridge vlan ifadd name = <{default}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4}>
[untagged = <{disabled|enabled}]>
where:
name The VLAN name. REQUIRED
intf The name of the bridge interface to add to the
VLAN.
REQUIRED
untagged Enable/disable interface as untagged for this
VLAN.
OPTIONAL