Installation Instructions

Table Of Contents
eth Commands
E-DOC-CTC-20071119-0004 v1.0
287
eth bridge vlan ifconfig
Modify bridge interface from virtual LAN.
SYNTAX:
eth bridge vlan ifconfig name = <{default}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4}>
untagged = <{disabled|enabled}>
where:
name The VLAN name. REQUIRED
intf The bridge interface from the VLAN to configure. REQUIRED
untagged Enable/disable interface as untagged for this
VLAN.
REQUIRED