Installation Instructions

Table Of Contents
eth Commands
E-DOC-CTC-20071119-0004 v1.0
295
eth device ifconfig
Configure ethernet interface.
SYNTAX:
eth device ifconfig intf = <{ethif1|ethif2|ethif3|ethif4}>
[type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|
100BaseTFD} or number]>
[state = <{enabled|disabled}]>
where:
intf The name of a physical interface. REQUIRED
type The ethernet type. OPTIONAL
state The interface state. OPTIONAL