Installation Instructions

expr Commands
338
E-DOC-CTC-20071119-0004 v1.0
tos [!] The Type Of Service specification in the IP
packet.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
precedence [!] The precedence in the IP packet (part of tos).
If a value is preceded by a “!”, it means NOT.
OPTIONAL
dscp [!] The diffserv code point in the IP packet (part of
tos).
If a value is preceded by a “!”, it means NOT.
OPTIONAL
proto [!] The IP protocol (name or number) in the IP
packet.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
srcport [!] The TCP/UDP source port number or range
begin.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
srcportend The source TCP/UDP source port range end.
(inclusive)
OPTIONAL
dstport [!] The TCP/UDP destination port number or range
begin.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
dstportend The TCP/UDP destination port range end. OPTIONAL
icmptype [!] The ICMP type (name or number) of the packet.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
icmpcode [!] The ICMP code or range begin.
If a value is preceded by a “!”, it means NOT.
OPTIONAL
icmpcodeend The ICMP code range end. (inclusive) OPTIONAL