Installation Instructions

Table Of Contents
grp Commands
372
E-DOC-CTC-20071119-0004 v1.0
grp rip ifconfig
Configure a RIP interface.
SYNTAX:
grp rip ifconfig intf = <{LocalNetwork|Internet}>
[rip = <{disabled|enabled}]>
[rxversion = <{rip_unspec|rip_v1|rip_v2|
rip_v1-2}]>
[authmode = <{none|cleartext}]>
[authstr = <password]>
[splithorizon = <{disabled|enabled}]>
where:
intf The name of the RIP interface to configure. REQUIRED
rip Enable/Disable the RIP status. OPTIONAL
rxversion Set the RIP receive version. OPTIONAL
authmode Set the RIP authentication mode. OPTIONAL
authstr Set the RIP authentication password. OPTIONAL
splithorizon Enable/Disable the split horizon status. OPTIONAL