Installation Instructions

ip Commands
E-DOC-CTC-20071119-0004 v1.0
419
ip Commands
ip arpadd Add an entry to the ARP cache of a
broadcast IP interface.
see page 421
ip arpdelete Delete an ARP entry. see page 422
ip arplist Display the ARP cache. see page 423
ip auto flush Flushes autoIP interfaces. see page 424
ip auto ifadd Creates a new autoIP interface. see page 425
ip auto ifattach Select and assign a link-local address
to an autoIP interface.
see page 426
ip auto ifconfig Configures an autoIP interface. see page 427
ip auto ifdelete Deletes an existing autoIP interface. see page 428
ip auto ifdetach Release the link-local address for the
given autoIP interface.
see page 429
ip auto iflist Shows the autoIP interfaces. see page 430
ip config Display/Modify global IP stack
configuration.
see page 431
ip debug httpprobe Send HTTP probe to measure the
round trip time taken to connect and
access
see page 432
ip debug sendto Send UDP packets. see page 433
ip debug stats Display statistics. see page 434
ip debug traceconfig Display/Modify IP stack trace
configuration.
see page 435
ip flush Flush all static IP parameters.
Dynamic info (e.g. from PPP links)
remains.
see page 436
ip ifadd Create an IP interface. see page 437
ip ifattach Attach an IP interface. see page 438
ip ifconfig Modify an IP interface configuration. see page 439
ip ifdelete Delete an IP interface. see page 440
ip ifdetach Detach an IP interface. see page 441
ip iflist Display all IP interfaces. see page 442
ip ifwait Wait for a status change of an IP
interface.
see page 443