Operation Manual

MAIN MENU
P9
English
5.2.4 LCN Mode
If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator,
channels will be stored in operator defined order. You can activate/deactivate the LCN function
by setting the LCN Mode to ON or OFF.
5.3 Setup
This menu allows you to set OSD Language, Subtitles preference, TV System, Region and
Time, Timer Setting, OSD Setting, Parental Lock and Auto Standby.
1. Use
p/q to highlight the desired menu and press OK to proceed. Select the desired item with
p/q. Settings can be changed with the t/u buttons. To get a better overview of possible
settings, press OK first. Now you can select settings with
p/q and confirm with OK.
2. Press EXIT/SORTIE to get back to the previous menu level.
5.3.1 OSD Language
This menu allows you to set the OSD Language.
5.3.2 Subtitles preference
This menu allows you to set the preferred Subtitles Language.
Subtitles Type this option is active only when Denmark is selected as country.
5.3.3 TV System
This menu allows to change settings concerning your TV set.
Display Mode: PAL/NTSC/AUTO
Aspect Ratio: Use this menu to configure the screen aspect. Possible settings
are: 4:3PS (Pan&Scan), 4:3LB (Letter Box), 16:9 (Wide Screen) and
AUTO.
Video Output: Use this menu to switch the video output mode between RGB and
CVBS.
5.3.4 Region and Time
Here you can set your region and time zone.
Region: This option is used for changing the region setting.
GMT Usage: This setting allows you to turn the usage of GMT time on or off.
The options are: Off / User Define / By Region
GMT Offset: This option is valid only when User Define is selected in GMT Usage
menu.
The GMT offset range is -11:30 ~ +12:00, in 30 minutes steps.
Date/Time: Date and Time options are valid only when Off is selected in GMT
Usage menu. Press OK followed by numbers to change the date
and time.
Time Display: When set to On, the receiver will display the current time on screen.
To turn this feature off, select Off.