Operation Manual

CONNECTION

NOTE: The batteries should not be recharged, disassembled, electrically short-circuited or be

mixed or used with other types of batteries.

If rechargeable accumulators instead of batteries are going to be used, we recommend using

(e.g. NiMH) types with low self-discharge to ensure long time operation of remote control.

1.5 Usage of external USB devices

 It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB

2.0 speciﬁcations, recording, playback and other multimedia functions of the receiver would not

work properly.

 To ensure best performance of your USB storage device please format it by this receiver (menu

Media+ Disk Format) to FAT32 system. Not all ﬁle systems are supported by the receiver.

 When using an external USB HDD (Hard Disk Drive) with the receiver, please note that some

HDD’s might draw more power than the receiver can deliver (5V/800mA). If so, please connect

your USB HDD to an appropriate external power adapter.

 THOMSON cannot guarantee compatibility with all types of USB storage devices.

 It is advised not to store important information on USB storage devices used with the receiver.

Always make backups of data on USB storage devices before using them with the receiver.

THOMSON will not take responsibility for any loss of information or circumstances caused by

loss of information.

2.0 CONNECTION

2.1 Connecting to TV and Terrestrial Antenna

Fig. 1

To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT

IN connector at the back of the receiver.

2.2 Connecting to a DVD/Video Recorder

Fig. 1

2.3 Connecting to a Digital Audio Ampliﬁer

Fig. 1

Connect your Digital Audio Ampliﬁer with the S/PDIF connector on the back of the receiver

3.0 YOUR RECEIVER

3.1 Front Panel

Fig. 2

3.2 Rear Panel

Fig. 3

1. USB To connect a USB device

2. IR IN To connect the IR extender

3. ANT IN To connect an antenna for reception of broadcasting signal.

4. TO TV To connect a TV set or to connect an extra receiver.

5. TV SCART Connector

To connect your receiver with your TV set using a SCART cable.