Operation Manual

FIRST TIME INSTALLATION

3.5 Installing the Batteries

Remove the battery cover from the remote control and put 2xAAA size batteries inside the

compartment.

The diagram inside the battery compartment shows the correct way to install the batteries.

1. Open the cover 2. Install batteries 3. Close the cover

Fig. 5

NOTE:

The batteries should not be recharged, disassembled, electrically short-circuited, be mixed

or used with other types of batteries.

3.6 Using the Remote Control

Fig. 6

To use the remote control, point it towards the front of the receiver. The remote control has a

range of up to 7 metres from the receiver at an angle of up to 60 degrees.

4.0 FIRST TIME INSTALLATION

If you use the receiver for the ﬁrst time, the Easy Install menu appears. Use p/q to select

Region, OSD Language, Antenna Power and Scan Mode and

t/u to select options. Then

use the

p/q buttons to move focus to Search and press OK to proceed with the automatic

channel scan.

5.0 MAIN MENU

In viewing mode press MENU at any time to enter the Main Menu. It consists of the following

submenus: Channel, Installation, Setup, Tools and Media+

5.1 Channel

1. Use the p/q buttons to select Channel and press OK to enter.

2. Use the

p/q buttons to highlight the desired item and press OK to select.

3. Press EXIT/SORTIE to get back to the previous menu level.

NOTE:

You can also press OK in TV mode to enter the channel list.

5.1.1 TV Channel list

1. In Channel submenu select TV Channel List with the p/q buttons and press OK to enter.

2. Use the

t/u buttons to change channel group (assumed you have already set up

Favourite groups).

3. With the

p/q buttons select the channel you wish to watch. Press OK to watch the

selected channel in full screen mode.

5.1.1.1 Edit

Use this menu to lock, skip, delete or rename channels or add them to a favourite list. Press

numeric button 1 to enter the Edit menu.

Highlight a channel with the

p/q buttons and press OK to select or press numeric button 0

to select all channels. Selected channels will be marked. This way of selection can be executed

for each of the edit functions.

Favor