HRD MODELS HRD4803U/ULP | HRD3606U/ULP | HRD3088U/ULP COOK LIKE A GOD USE AND CARE MANUAL
USE AND CARE MANUAL PROFESSIONAL DUAL FUEL RANGES HRD MODELS HRD4803U/ULP | HRD3606U/ULP | HRD3088U/ULP
Safety and Warnings Table of Contents 1. Warnings............................................................................................................................................................. 4 2. Welcome............................................................................................................................................................. 5 3. Before You Start.............................................................................................................
Safety and Warnings Flame Size..........................................................................................................................................................38 Power Failure.....................................................................................................................................................38 Cooktop.........................................................................................................................................................
Safety and Warnings 22. Troubleshooting Guide.....................................................................................................................................61 Cooktop............................................................................................................................................................. 62 Oven..............................................................................................................................................................
Safety and Warnings 1. Warnings These are the most critical warnings summarized below. If the instructions in this manual are not followed exactly, a fire or explosion may result, causing property damage, personal injury or death. Do not store or use gasoline or other flammable substances and liquids near this or other appliance, Never use this appliance as a space heater to warm a room. Installation of this appliance must be done by a qualified service agency or gas supplier.
Safety and Warnings 2. Welcome Thank you for purchasing your HRG dual fuel indoor range. We appreciate your business and we recommend that you read this entire User’s Manual before operating your new appliance for the first time. This manual contains instructions on how to properly install and set up your new range, as well as insights into the unique features that our product offers. Please keep this manual for future reference, as it contains answers to questions that you might have as you begin to cook.
Safety and Warnings 4. Safety and Warnings Safety Symbols Symbol Definition This symbol will alert you to potential personal or property safety hazards.
Safety and Warnings Electrical Shock Hazard Before removing a faulty oven light bulb, make sure you turn OFF the power to the range at the main fuse or circuit breaker panel. If you don’t know how to do this, contact an electrician. Do not remove the kick strip grate. Due to electrical wires behind it, the kick strip grate should only be removed by a qualified technician.
Safety and Warnings Slide the range forward. Install the anti-tip device as described in the instruction sheet Safely tilt the front section of the range and slide the range slowly back against the wall. The rear pins should slide under the bracket. Do not use the appliance until it has been secured. Failure to follow this advice may result in serious injury. 1. Find the two anti-tip brackets and screws placed in the plastic bag with manual. 2.
Safety and Warnings Do not heat unopened food containers such as cans. Build-up of pressure may cause container to burst and result in injury. Failure to follow this advice may result in injury or death Fire Hazard Never use your appliance as a space heater. Persons could be injured or a fire could start. Keep the area around the appliance free from combustible materials (e.g. wall coverings, curtains, drapes), gasoline and other flammable vapors and liquids.
Safety and Warnings the directions of the cleaner manufacturer. Never use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning. Failure to follow this advice may result in poisoning or death. Hot Surface Hazard Accessible parts may become hot during use. Do not touch burners, areas near burners, the grill, griddle, grease drippans, heating elements or interior surfaces of the oven.
Safety and Warnings Other Safety Tips Read all the instructions before using the appliance. Use the appliance only for its intended purpose as described in these instructions. appliance from the power supply before any servicing. Careful opening oven door Use care when opening the oven door by allowing warm air or steam escape before removing or replacing food. Be sure your stove is properly installed and grounded by a qualified technician. All servicing should be referred to a qualified technician.
Safety and Warnings Use proper gas conversion kit This stove only uses natural gas. For LP gas, please use conversion kit. Please have a certified technician install the unit and kit. If planning to resell unit, please indicate whether it is natural gas or has LP kit installed. Turn off all controls and wait for appliance parts to cool down before touching them. Do not touch the burner grates or surrounding areas until cool. Do not use water on grease fires. Clean appliance with caution.
Dual Range Overview 5.
Dual Range Overview Electric Broiler (Top) Heating Element: 1@3 500 W. Oven Electric Heating Element: 1@850 W(Top) & 3 000 W (Base), apply to 30-inch and 36inch oven. 1@2 500 W (Base), apply to 48-inch dual fuel range which has 18-inch oven.
Dual Range Overview Cooktop Equipment Dual fuel range cooktop burner equipment as below: Model 1 2000 BTU 1 5000 BTU HRD3001U 1 8000 BTU Griddle (1 5000 BTU) 4 No 2 No HRD3002U 2 HRD3004U 4 No No HRD3031U 2 2 HRD3088U 2 1 HRD3604U HRD3605U 1 No 6 No 6 No HRD3606U 1 2 3 No HRD3618U 3 2 1 No 3 3 No 6 1 HRD3620U HRD4801U HRD4802U 6 HRD4803U 2 2 HRD4804U 3 3 HRD4806U 3 HRD3031U-A 2 2 HRD3618U-A 3 2 HRD4804U-A 3 3 15 1 2 1 1 3 1 No 1 No 1
Installation Instructions 6. Installation Instructions Save the next two pages for the local electrical inspector’s use 1. 2. 3. 4. 5. 6. 7. A child or adult can tip the range and be killed. Install the anti-tip device to the structure and/or the range. Engage the range to the anti-tip device. Re-engage the anti-tip device if the range is moved. See installation instructions for details. Failure to do so can result in death or serious burns to children or adults.
Installation Instructions bottom A is allowed distance between bottom of cabinet and stove. 7. Positioning of Range You may install a non-combustible material, such as tile, on the rear wall above the range and up the vent hood. It is not necessary to install non-combustible materials behind the range below the counter top height. DO NOT INSTALL CLOSER THAN 12 MM FROM ANY ADJACENT SURFACE.
Installation Instructions The maximum depth of cabinets installed above cooking tops be 13 in (330mm). 8. Dimensions and Clearances The depth of the range is 27 ½’’ (69.8 cm) overall. The range may be installed flush to the rear wall.
Installation Instructions 30” Dual Fuel Range Clearance 19
Installation Instructions 36” Dual Fuel Range Clearance 20
Installation Instructions 48” Dual Fuel Range Clearance 21
Installation Instructions Top Hood and Cabinet Specifications Condition Minimum clearance allowed Clearance between the top of the cooking surface and the bottom wood or metal cabinet that is protected by not less than: 24” 1/4-inch-thick flame-retardant millboard covered with not less than: o No. 28 MSG sheet steel or o 0.015-inch-thick stainless steel or o 0.024-inch-thick aluminum or o 0.
Installation Instructions ....
Installation Instructions 9. Important Notes to the Installer 1. 2. 3. 4. 5. Read all instructions contained in these installation instructions before installing range. Remove all packing material from the oven compartments before connecting the electrical supply to the range Anti-tip brackets MUST be installed Observe all governing codes and ordinances. Be sure to leave these instructions with the consumer.
Installation Instructions shrinking, warping or discoloring. Do not install the range over carpeting unless you place an insulating pad or sheet of 1/4" (6.4 mm) thick plywood between the range and carpeting. 9. Do not obstruct the flow of combustion air at the oven vent nor around the base or beneath the lower front panel of the range. Avoid touching the vent openings or nearby surfaces as they may become hot while the oven is in operation. This range requires fresh air for proper burner combustion. 10.
Installation Instructions 10. Electrical Installation Power Supply Cord Kit Electrical Requirements, Connection & Grounding Guidelines ** The Plug is not included in the package. Please purchase this plug from your local appliance store. ** This appliance is manufactured ready to be installed with a 4-wire cord set. A 3-Pole, 4-Conductor Cord Kit with NEMA Type 14-50R, 50 Amperes dedicated circuit and marked for use with ranges is recommended by the manufacturer for Thor Kitchen Dual Fuel Ranges.
Installation Instructions Do not loosen the nuts which secure the factory-installed range wiring to terminal block while connecting range. Electrical failure or loss of electrical connection may occur. Access to Terminal Block Electrical Shock Hazard Electrical ground is required on this appliance. Do not connect to the electrical supply until appliance is permanently grounded. Disconnect power to the circuit breaker or fuse box before making the electrical connection.
Installation Instructions Electrical Connection Four Conductor Wire Connection to Range 1. Remove the screws at the lower end of the rear access cover and take it down to expose range terminal connection block. 2. Remove the screws to lose the cable clamp and pass through the four-conductor wire from the bottom of the range. 3.
Installation Instructions The wiring diagram for the terminal connection block is on the access cover. Electric Power Supply Requirements Your range must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes.
30
Gas Supply Requirement Electrical Grounding Instructions This indoor gas cooking appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded threepronged receptacle. Where a standard two-prong wall receptacle is encountered, it is the responsibility and obligation of the customer to have it replaced with a properly grounded three-prong wall receptacle.
Gas Supply Requirement The use of cabinets for storage above the appliance may result in a potential burn hazard. Combustible items may ignite; metallic items may become hot and cause burns. If a cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7cm) beyond the bottom of the cabinets. Connect Range to Gas Supply 1.
First Use 12. First Use Before you start 1. Make sure that the anti-tip of the range has been properly installed. 2. Find the model and serial numbers on the CSA label. Note these numbers down for future reference in the space provided in section “Warranty and service”. 3. Read this guide, taking special note of the “Safety and warnings” section. 4. Remove all the packaging from the oven(s) and cooktop. Recycle items that you can.
First Use Positioning the shelves Both the sides panel and shelves have safety stops to keep them from sliding out of the oven when pulled forward. Shelves also have a stop that prevents the shelves from hitting the back of the oven.
First Use This is how to properly position the shelves: Hold the front of both sides of the shelf firmly to keep it in horizontal position. Put the shelf on the slot horizontally. Lift the front about 15 degrees upward until the tag of the shelf clears the safety stop of the side rack. Then lower the shelf horizontally and slide all the way into the oven. Other shelves can be installed this way.
Cooktop Safety Guidelines 13. Cooktop Safety Guidelines There are dual ring burners have the same low turn-down setting (SIM) for gentle simmering (680 BTU/hr.). Use the SIM setting for melting chocolate and butter, cooking rice and delicate sauces, simmering soups and stews, and keeping cooked food hot. Never leave the cooktop unattended when in use. Boil over causes smoking and greasy spills that may ignite. Never allow flames to extend beyond cookware or curl up on sides.
Cooktop Safety Guidelines Surface Burner Ignition To light the top burners, push and turn the appropriate control knob counter clockwise to the “HI” position. You will hear a clicking noise – the sound of the electric spark igniting the burner. Once burner ignition has been achieved, turn the burner control knob to adjust the desired heat setting. When one burner is turned to the “HI” position, the burner igniters will spark.
Cooktop Safety Guidelines Flame Size When you select the flame size, watch the flame when you turn the knob. Any flame larger than the bottom of the cookware is wasted. The flame should be steady and blue in color. Foreign material in the gas line may cause an orange flame during initial operation. Power Failure If the gas does not ignite within four seconds, turn off the valve and allow at least five minutes for any gas to dissipate. Repeat the lighting procedure. Do not attempt to during power failure.
Cooktop Safety Guidelines Burner Grates The grates must be properly positioned before cooking. Improper installation of the grates may result in scratching of the cooktop and/or poor combustion.
Cooktop Safety Guidelines To light the oven burner, push and turn the appropriate control knob counter clockwise to the (150℉~500℉) position. You will hear a clicking noise, which is the sound of the electric spark igniting the burner. Once burner ignition has been achieved, turn the burner control knob to adjust the desired heat setting. Broil Burner Use To light the broiler burner, push and turn the appropriate control knob counterclockwise to the broil position.
Cooktop Safety Guidelines Oven Cooking Safety Guidelines Do not block the ducts on the rear of the range when cooking in the oven. It is important that the flow of moist warm air from the oven and fresh air into the oven burner never be interrupted. Avoid touching the vent opening or nearby surfaces during oven or broiler operation because they are hot. Do not pace plastics, paper or other items that could melt or burn near the oven vent. Use all the oven modes with the oven door closed.
Oven Function 14. Oven Function Natural Airflow Bake Natural airflow bake occurs when heat is transferred into the oven from the bake burners in the bottom of the oven cavity. Heat is then circulated by natural airflow. This is a traditional bake setting. Convection Bake The oven convection fan circulates and distributes the heat in the oven for faster even cooking. Convection cooking allows you to bake more items on multiple racks.
Oven Function The convection fan circulates heated air over and the around the food being roasted, sealing juices quickly for a moist and tender product while, at the same time, creating a rich golden-brown exterior. Use the broil/roast pan and slotted grid supplied with the range when roasting to elevate the meat on a metal roasting rack. This allows hot air to circulate around the meat, browning it more evenly like a rotisserie.
Griddle Operation 15. Broiler Operation Door must be closed during broiler operation. Broiling is a method of cooking tender cuts of meat directly under the infrared broiler in the oven. Broiling in the oven is accomplished with the oven door closed. It is normal and necessary for some smoke to be present to give the food a broiled flavor. If you open the oven door to check the food, have it open for as short a time as possible.
Griddle Operation To set the oven to Broil: Place the broiler pan insert on the broiler pan. Then place the food on the broiler pan insert. Arrange the interior oven rack and place the broiler pan on the rack. Be sure to center the broiler pan and position directly under the broil burner. If preheating the broil burner first, position the broiler pan after the broil burner is preheated. Turn selector knob to Broil.
Griddle Operation When the griddle is preheated to the desired temperature, the indicator light will turn on. Butter or cooking oil can may be added. The surface of the griddle is hot after use. Please allow sufficient time for the griddle to cool prior to cleaning. When using the appliance or the first time. The oven and broiler burners should be turned on to 。 。 burn off the manufacturing oils. Turn the oven on to 450 F (230 C) for 20 to 30 minutes.
Cleaning Instructions Don’ts Do not use aerosol cleaners until the range has completely cooled. The propellant substance in these cleaners could catch fire in the presence of heat. Do not let soiling or grease accumulate anywhere in or on the range. This will make future cleaning more difficult and may present a fire hazard. Do not use any abrasive or harsh cleaners, cloths, scouring pads or steel wool. These will scratch your range and damage its appearance.
Cleaning Instructions Dry the components with a soft, lint-free cloth. Cleaning Side Racks Pre-soak any stubborn, burnt-on soiling, then clean with a solution of mild detergent and hot water and wipe dry with a microfiber cloth. Alternatively, clean these in the dishwasher. Cleaning Oven Shelves To remove stubborn or “baked-on” material, scrub with a dampened, soap-filled, non-metal, non-abrasive pad, then wipe dry. Apply a chrome cleaner with a damp sponge or cloth following manufacturer’s instructions.
Cleaning Instructions Cleaning Oven Door Gasket Avoid cleaning this part. If you need to remove large food particles off it, proceed as follows: Dampen a sponge with clean hot water. Gently wipe off the soiling, but do not rub. Press a dry towel gently on the gasket to dry. Do not use any cleaning detergents on the gasket. The gasket is essential for a good seal. CAUTION: Do not scratch, displace, or damage it. Cleaning Stainless Steel Surfaces Do not use any cleaning product with chlorine bleach.
Replacing Burner Parts 19. Replacing Burner Parts This diagram shows how to replace the burner parts. When replacing the burners, make sure that the two locating pins on the bottom of the brass flame spreader are properly aligned with the locating pin holes on the top of the simmer ring.
Replacing Oven Door Removing Oven Door Open the door very carefully 3. Holding the door firmly on both sides Open the levers fully on both sides. 4. Disengage the hinges and remove the gently close it about halfway. door, place on a protected surface. ..
Replacing Oven Door Replacing Oven Door Hold the door firmly in an approximately open position Open the door fully as shown, Insert the hinge tongues into the slots making sure that the notches on both sides drop into place as shown. 4. Fully close the levers on the left and right hinges, as shown, then close the door.
Replacing Oven Door Replacing Oven Light Bulb When replace bulbs, release the glass cover on the lamp holder first, and then remove the bulb to replace new light bulb.
20. Procedure for Checking the Dual Burner Clicking Problem Step 1 Make sure the Burner Design is correct. Our current design for the burner is has the electrode on the left side (10 o’clock) and cross-over on the right side (2 o’clock). There are four parts for the dual burners. They are burner cap, flame ring base, flame ring and burner base. Step 2 Make sure the electrode is going through the hole on the flame ring and it is vertical to the surface of flame ring base.
Step 3 For the flame ring base part. make sure that the electrode will go through the hole on the 10 o’clock position. Make sure the electrode is not going through the hole next to the cross-over. Step 4 Make sure the electrode is vertical to the surface of the burner base. Please be notified that there’s a slot at the 8 o’clock position of the burner base. This slot helps to locate the burner base. Here’s the procedure to have Customer/Servicer check the condition for our current burner design.
How to install Knobs and Handles For Thor KD Models 1. Check the knobs; ①Big Oven Knob ②Griddle/Small Oven Knob ③Dual Burner Knob ④Single Burner Knob 2.
How to install Knobs and Handles For Thor KD Models HRD3088U 1 0 1 3 HRD3606U 1 0 2 4 HRD4803U 1 2 2 4 Part #* 22.99.0091-A0 22.99.0093-A0 22.99.0090-A0 22.99.0143-A0 *:For any parts damage or missing, please contact 877-288-809, or send email to info@thorgroup.us 3. Find the right knobs for each shaft on the range. Push the knob in to fully attach the shaft and make sure there’s no friction between knobs and bezels.
How to install Knobs and Handles For Thor KD Models HRD3606U HRG3618U HRG4808U 58
How to install Knobs and Handles For Thor KD Models HRD4803U 4. Your Thor range might have a KD handle that needs to be installed. Please Follow up the following procedures for the oven door handle installation 4.
How to install Knobs and Handles For Thor KD Models 1 * Handle (For 18”, 30” or 36” Oven) 4.2 Connect door handle holders to each side of the handle 4.
How to install Knobs and Handles For Thor KD Models 4.4 Use the wrench to tighten the door handle holders. 5. Check if the oven door handle is level and stable. ____________________________________________________ For Any installation Inquiries, please call Thor Customer Service Support # 877-288-8099, or email to info@thorgroup.
Troubleshooting Guide 22. Troubleshooting Guide If you can’t find an answer to your problem in the chart below, or if the problem cannot be fixed, you will need technical help. Contact your Authorized Service Center or Customer Care. Problem Probable causes What to do Cooktop Always be sure the stove is cool and burners OFF before proceeding. Some burners will not light. Flames do not burn all around the burner cap. Burner parts or igniters may be wet, dirty, or misaligned.
Troubleshooting Guide Problem Probable causes What to do If there is a Power Failure, can I still use the cooktop burners? Power outage in your area. The cooktop burners can still be used. To light them: 1.Holding a lighted match to the flame spreader, push in on the control knob and turn counterclockwise to LITE. 2.When the flame is burning all the way around the burner, you may adjust the heat.
Troubleshooting Guide Problem Possible causes What to do No power supply (oven light and halos do not come on either). Check that the circuit breaker hasn’t tripped and there is no power outage in your area. If there is a power outage, you cannot use the oven until power has been restored. Oven The oven doesn’t work (no heating). No gas supply (gas ovens). The supply to the house may not be working or there may be an outage. Contact your local gas supplier.
Troubleshooting Guide Problem Possible causes What to do The oven is not cooking evenly Large item like a turkey being cooked. If you are cooking a large item, be prepared to turn it round during cooking. If two shelves are used, check that space has been left for the heat to circulate. When a baking tray is put into the oven, make sure that it is placed centrally on the shelf. Check that the door seal is not damaged. A dish of water when placed on the shelf should be the same depth all over.
Appendix Rubber Pad Installation on Back Panel . To Prevent the range too close to the wall, there are 2 plastic pads offered with the user's manual, please find the accessories and follow the below steps: 1. check the installation kit packed with manual. 勹勹 2* screws 2* rubber pad 2. Install the 2 rubber pat as showed above.
WELCOME TO THE CLUB You chose THOR Kitchen to enhance your culinary journey and we’re stoked to have you in the club. Think of it as a secret society of really savvy people, such as yourself, choosing professional power and performance at an affordable price. Register your product by following the steps below. WARRANTY REGISTRATION Scan theQR code or visit thorkitchen.com/warranty Input your product info and select register You’re done. Let’s get cookin’.
