User manual

Slide the black guide sleeve onto the spindle. Then

loop the drive belt around the sub-platter and the motor

pulley. ➔ Fig. 2

Avoid oil or grease coming into contact with the belt,

pulley or sub-platter. If necessary, these parts can be

cleaned with glass cleaner or pure alcohol and a lint-

free cloth.

The belt tension is factory-adjusted. If it needs to be re-

adjusted (e.g. to compensate for gradual belt stretch),

loosen the locking screw of the eccentric motor support

ring and carefully rotate the ring. ➔ Fig. 3

If the belt tension is changed, the motor speed will

need to be reset. ➔ Page 27

The drive belt should be replaced every few years.

Thorens replacement belts are available from any

Thorens dealer or distributor.

Fig. 3

Fig. 2

Setup and Assembly