Caution : You must read this before you proceed Recliner Chair Page 1 OF 10
Label Picture Description QTY A Chair Backrest 1 B1 Right Wing 1 B2 Left Wing 1 C Chair Base 1 D Front Leg 2 E Hind Leg 2 Page 2 OF 10
Label Picture Description QTY 1 Gasket 7 2 Washer 3 3 Allen Key 1 4 Bolt (M6*40mm) 3 Before Beginning Assembly: Page 3 OF 10
Parts Introduction Chair Backrest (A) Left Wing(B2) Right Wing(B1) Chair Base(C) Hind Leg(E) FRONT FACING Front Leg (D) This Recliner Chair has multiple parts and may require up to some 20 minutes to assemble.To give you an overview of the Recliner Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Step 2 Inner Box C Footrest B1 B2 Then,turn the Chair Base(C) upside down on a clean,non-marring surface. Extend the Footrest to open. Carefully take out inner box stowed as shown above. Open it, and you will find Wings (B1) & (B2). Stow the Footrest to original position. Step 3 Legs:Bevelled plane inside facing 1 E D Keep the Chair Base in the same position,first,install the Front Leg(D) at the bottom of the Chair by placing one Gasket(1) on the threaded stem.
Step 4 B2 A Position the Chair Backrest(A) on it's right side. Align the mounting positions of the Left Wing(B2) with left side of Chair Backrest (A). Then slide Left Wing(B2) forward by hand to make sure it locks into the position as shown in the picture. Step 5 3 B2 4 2 Attach Left Wing(B2) to the Chair Backrest(A) using Bolts(4) and Washer(2) with Allen Key(3). Fully tighten it until secure.
Repeat Step 4 and Step 5 to attach Right Wing(B1) to the right side of the Chair Backrest(A). Step 7 With assistance from your adult partner,hold up the fully assembled backrest with Wings,stand behind the chair. Insert the small metal arms on the sides of the Chair Backrest into the prefabricated slide lock gadget on the Chair Base as shown above. Firmly but gently,push the Chair Backrest downwards until the Backrest is fully slotted and locked into position.
Step 9 Make sure all parts are connected and securely locked into position. Your Chair is ready for use. Step 10 B1 B2 C E C Disassembly Note:Open the flap on the Chair Backrest(A),use a screwdriver(Don't use fingers) pressing outward on the metal ear on the preattached Metal Bracket on one side of the Chair Base(C),with assistance of you adult partner to keep the Chair Base(C) in place, pull out the Chair Backrest(A) upward at the same time,repeat the same step for another side.
User Instructions. Recliner Chair Please read the Instruction Manual below carefully before use. This is a Recliner Chair. At anytime in a reclined seat position or in the upright position. You may enjoy the rocking motion by using your body weight in a back-front rocking motion. Supervise children, when in use of this Recliner. To get into a reclined posture - To Recline backrest Sit into the seat. Place your feet apart . Place your left and right arm onto the armrest.
Page 10 OF 10
