Manualshelf

Installation Guide

ManualsBrandsTimberTech ManualsBuilding Supplies5-1/2-in x 5-1/2-in Premier and Trademark Slate Gray Composite Deck Post Sleeve
21222324252627282930
Page 30
Installing AZEK Rail with Glass Infi ll
TRIM RAILS, EXTRUSIONS, AND GASKETS
INSTALL BOTTOM SUPPORT RAIL
5
4
• Measure distance between the posts at the Bottom Support Rail.
• Transfer measurement to Top & Bottom Rails, Top Support Rail and cut
to length.
• Measure and cut Top and Bottom Glass Channels, and Rubber Gaskets
to appropriate lengths.
• Position rail assembly onto Support Blocks.
7/64” Pre-drill
#8 x 3” Green
Coated Screws
Cut Rubber Gaskets
with utility knife
Glass Channels must be at
least 4” shorter than rail.