Installation Guide

Page 7
Installing RadianceRail Express
®
Stairs System
Consult your local building codes for guard and handrail requirements. RadianceRail Express
stair rail and brackets are built at a nominal 34 degrees and may require adjusting of the
bracket within the range of 32 to 36 degrees.
1
2
• Trim Post Sleeves to
desired length.
• Slide Post Sleeve and Post
Skirt over post (do not force).
• Ensure posts are square
and plumb.
INSTALL POST
SLEEVES AND
POST SKIRTS
CUT TOP AND
BOTTOM RAIL
• Cut the Top and Bottom
Rail to length and
angle.
Top Rail Length
Bottom Rail Length
Stair Angle
Lay Bottom Rail along
stair tread. Position Rail to
maximize space between the
last cut hole and the Post at
each end.
Determine whether the rail will be cut
with a hole or Baluster in the center.
1 3/16”-3 3/4”