Installation Guide
Page 4
Installing RadianceRail
®
with Balusters
4
5
INSTALL BOTTOM
SUPPORT RAIL
SPACE BALUSTER
AND
TRIM RAILS
The space between the end baluster and post can not exceed 4”
• Position Bottom
Support Rail assembly
onto Support Blocks.
• Measure distance between
the posts at the Bottom
Support Rail.
• Transfer measurement to Bottom
Rail and center either on a pre-drilled
hole or between two pre-drilled holes.
• Cut Bottom Rail and Top Support Rail
to length.
#8 x 3” Green
Coated Screws
Centerline
Odd number of balusters
Even number of balusters
7/64” Pre-Drill
#8 x 3” Green
Coated Screws
Bottom
Rail
Top
Support
Rail