Installation Guide
Page 9
Installing RadianceRail
®
Stairs with Balusters
7
8
INSTALL BOTTOM
SUPPORT RAIL
INSTALL RAIL
ASSEMBLY
Pre-Drill through
Bottom Support
Rail ONLY with
3/16” bit
Bottom Support Rail
#8 x 3”
Coated Screw
• Wedge Foot Block under
Support Rail & attach.
#8 x 3” Green
Coated Screws
• Secure Mounting Brackets to
posts.
Pre-Drill
7/64”
• Attach Mounting
Brackets to
Bottom
Support Rails.
Pre-Drill 7/64”
#8 x 3/4” Coated
Screws
Center screw
aligned with rail
centerline
Brackets must be on the side of the rail
facing the stairs.
For sections up to 6’: Place one Foot
Block in the center of the rail
For sections 6’ to 8’: Space two Foot
Blocks approximately at 1/3 intervals on
the rail
Position and center rail
assembly over Bottom
Support Rail.
• Mark Ends of Top
Support Rail.
• Rotate Rail
assembly out of
way to fasten
Support Block.
• Secure Mounting
Brackets to Posts.
Pre-Drill
7/64”
#8 x 3”
Coated
Screws
Pre-Drill 7/64”
#8 x 3” Green
Coated Screws