Installation Guide

Page 4

ATTACH BALUSTERS

AND HINGE

BRACKETS

ATTACH FOOT

BLOCKS

• Counter-bore foot blocks.

• Place Foot Blocks about

every 2’.

• Pre-drill at the center of

each Baluster hole on

each Universal Rail.

• Attach Balusters with

screws to both Universal

Rails.

Pre-Drill 3/16”

#8 x 2 1/2”

Coated Screws

(Use provided 2”

and 3” Screws for

Aluminum Balusters)

Pre-Drill 9/64” for Brackets

#10 x 7/8” Coated Screws

• Attach Hinge Brackets

to each side of both

Universal Rails.

For sections up to 6’: Place two Foot Blocks at 1/3 intervals onthe rail

For sections 6’ to 8’: Space three Foot Blocks approximately at 1/4 intervals on the rail

Foot Block Preparation

Bore 1/2”

Drill 3/16”

Hole

2 1/2”

1/3

Pre-Drill

9/64” into the

Universal Rail

#10 x 2”

Coated Screws

Installing Evolutions Rail

Contemporary Style with Balusters