Installation Guide

Installing Evolutions Rail
TM
Contemporary Style Stairs with Balusters
Page 8
TRIM BALUSTERS
ASSEMBLE RAIL
SECTION
3
4
• Pre-drill at the center of
each Baluster hole on
the Universal Rails at the
angle of stairs.
• Attach Balusters to both
Universal Rails.
• Trim all Balusters to rail
angle and maximize
length.
• Attach Hinge Brackets to
both Universal Rails.
Pre-Drill 9/64”
#10 x 7/8”
Coated Screws
Pre-Drill 3/16”
#8 x 2 1/2”
Coated Screws
(Use provided 2”
and 3” Screws for
Aluminum Balusters)
Aluminum Stair Balusters are pre-cut
to a stair angle and are not to be
cut on the jobsite.