Installation Guide
Installing Evolutions Rail
TM
Contemporary Style Stairs with Balusters
Page 9
ATTACH FOOT
BLOCKS
• Foot Blocks should be
placed about every
2’. Temporarily install
infill assembly to help
determine locations.
5
Bore 1/2”
Drill 3/16”
Hole
Stair Angle
2 1/2”
6
MEASURE AND TRIM
TOP POST AND TOP
POST SLEEVE
• Temporarily place infill
assembly in position.
• Mark the top of the Top
Universal Rail.
• Remove Post Sleeve and
trim to length, then Trim
Post to same length.
• Replace Post Sleeve.
Post Sleeves should be flush with
top Universal Rail.
Pre-Drill 9/64” into
Universal Rail
#10 x 2” Coated
Screws
Foot Block Preparation
For sections up to 6’: Place two Foot Blocks at 1/3 intervals on the rail
For sections 6’ to 8’: Space three Foot Blocks approximately at 1/4 intervals on the rail