Auto-Set Dual Alarm Digital Clock Radio Owner's Manual

Operating the Dual Alarm System

This clock radio features a dual alarm system, with two separate alarms that can be

operated independently. The alarms can be set to wake two people at different times, or

to have a main alarm and a backup. One alarm features your choice of radio stations as

an alarm wake sound, while the second features a buzzer wake sound. You can set the

radio alarm, the buzzer alarm, or both alarms.

Setting Radio Alarm

1. Press the  Alarm Set Button. The display will flash and the Radio Alarm Indicator

will appear. If you do not begin setting the time within ten seconds of pressing the 

Alarm Set Button, the display will stop flashing and you will need to press the 

Alarm Set Button again.

While the display flashes, press the

 Tuning/Set Buttons

to set the wake time. Hold

a button for a few

seconds to advance the time rapidly. Be sure to set the correct

AM/PM time, as shown by the PM Indicator.

3. After setting the radio alarm time, you will need to select the station to wake up to.

First, press the  AM/FM Button to select a radio frequency. Next, select a station

using the  Radio Preset Buttons. For more information on programming radio

stations into memory, see the Programming Radio Station Settings section of this

manual. Rotate the  Volume Thumbwheel to set a wake sound volume level.

4. After setting the radio alarm wake time and sound, you will need to select your 7-5-2

setting. The 7-5-2 setting lets you set the alarm for a full week, weekdays only, or the

weekend. Before setting the alarm, be sure that the correct date is set, as shown in

the “Auto-Set” and Manual Time and Date Settings section of

the manual. While the

display is still flashing, press the

 Date/7-5-2 Button

until the desired setting is shown.

5. After you have set the radio alarm wake time, wake sound, and 7-5-2 setting, press

the  Alarm Set Button twice so that the display shows the standard, non-flashing

display.

Setting Buzzer Alarm

1. Press the  Alarm Set Button twice. The display will flash and the Buzzer Alarm

Indicator will appear.

While the display flashes, press the

 Tuning/Set Buttons

to set the wake time, as

described above.

3. After setting the buzzer wake time, use the  Date/7-5-2 Button to select the buzzer

7-5-2 setting, as described above.

4. After you have set the buzzer wake time and 7-5-2 setting, press the  Alarm Set

Button once so that the display shows the standard, non-flashing display.