Instructions / Assembly
Table Of Contents
ASSEMBLY INSTRUCTIONS
NOTICE: Don’t tighten screws until all screws and parts are in place.
STEP1.
Use 1*part 1 iron screw to connect the part F extend board and the part B slide main board.
Use 18 * part 5 nut to connect part C (2 * long slide armrest and 2 * short slide armrest) and the main board( part B and
part F) on both sides, and then use 2 * part 10 rectangle screw to tighten the middle nuts.
3
①
⑤*9
⑤
*9
⑩
*2
B
C
F