Use and Care Manual

11.Transportation
Packaging
We package the mobility scooter may prevent it from removing in the
package, shaking in the package or any scratch, by following the below
steps:
1, put the scooter into the prepared carton (Photo 11.1), like the position in
Photo 11.2.
2,Cover the carton and fix the whole carton with professional ropes for
packaging.(Photo 11.1 and Photo 11.2).
(P11.1) (P11.2)
(P11.3) (P 11.4)
Important
Our cartons comply with GB/T4857.18(equals to ISO4180/2):
1.Comply with test dropping from 500mm height
2. Pass transport testing requirements of 2.5m stacking；
Notes
1, Please make sure there is no any obvious damage on the outside of the
carton, crushed area or serial no. before open it.
2, reverse the packaging steps to get the scooters, owner manual,
warranty card, inspection report or quality certificates, and so on.
3 read the owner’s manual carefully to familiar with assembling or
operating your scooters.
4 turn on the scooter and check whether it is normally operated.
17