Use and Care Manual

Warnings

This device or system should be kept away from other equipments. If
they must be put together, pls check whether the device or system
can run normally.

You should consider the original manufacturer of the device or system
as the sole supplier. Failure to do so may cause EMC increase and or
decrease anti-EMC ability.
Attachments：
Guidance and manufacturer’s Declaration–
electromagnetic emission
（SW-1000Sscooter）is intended for use in the
electromagnetic environment specified below. The customer or
the user of the （SW-1000Sscooter） should assure that it is
used in such an environment.
Emission Test
Compliance
Electromagnetic
environment–guidance
(SW-1000Sscooter) use RF
energy only for its internal
RF Emission
function. Therefore, it’s RF
Group 1
emissions are very low and
CISPR 11
are not likely to cause any
interference in nearby
electronic equipment.
RF Emission
Class B
(SW-1000Sscooter) is
CISPR 11
suitable for use in all
establishments, including
Harmonic Emissions
Class A
domestic establishment and
IEC 61000S-3-2
those directly connected to
the public low-voltage power
supply network that supplies
Voltage
buildings used for domestic
fluctuation/flicker
complies
purposes.
emissions
IEC 61000S-3-3
32