Use and Care Manual

Conducted RF
3 Vrms
3 Vrms
IEC 61000S-4-6
150 kHz to 80
MHz
Radiated RF
3 V/m
IEC 61000S-4-3
3 V/m
80 MHz to 2.5
GHz
Portable and mobile
RF communications
equipment should be
used or closer to any
part of the
（SW-1000Sscooter）,
including cables, than
the recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
separation
distance
d =
1.2
P
d =
1.2
P
80 MHz
to 800 MHz
d =
2.3
P
800 MHz
to 2.5 GHz
Where P is the
maximum output power
rating of the transmitter
in watts(W) according to
the transmitter
manufacturer and d is
the recommended
separation distance in
the meters( m).b Field
strengths from fixed RF
transmitters, as
determined by an
electromagnetic site
survey, should be less
than the compliance
level in each frequency
range.
Interference may occur
in the vicinity of the
equipment marked with
the following symbol:
35