Use and Care Manual

On/ Off Switch, Battery Gauge, Speed Control, head Light, Horn and

Directional Control Levers.

If you have previously used or owned a scooter before you MUST still

read the Owners Manual carefully to fully understand the controls and

safety warnings.

If you are in any doubt of their functions then please turn to pages13

and 16 of this manual.

Transporting

Your scooter may be disassembled quickly and simply for

transportation:

1. Lift off the front basket.

2. Remove the seat, leaving the seat stem in position.

3. Place the basket on the floor mat appropriately.

4. Lower the tiller, using the folding knob, to its lowest setting locking

in the basket. Make sure that there is at least 30mm between Tiller and

battery pack.

5. using the lifting handles provided carefully lift the scooter safely and

securely into the luggage compartment of the vehicle.

TIP:

Using the front bumper and rear lifting handle provided carefully lift

the scooter.

To reassemble the scooter reverses the sequence above.

Important:

When reassembling the scooter, remember to insert the battery

locking pin, because failure to do so may result in the batteries

disengaging during use. Always secure your scooter parts before

transportation. Remember to engage the drive unit by pushing the

freewheel lever forwards to stop the scooter from moving.