Product Manual

25
maintenance
PowrBeast
7.6 HIGHPRESSURE HOSE
Inspect the high-pressure hose visually for any notches or
bulges, in particular at the transition in the ttings. It must be
possible to turn the union nuts freely. A conductivity of less
than 1 MΩ must exist across the entire length.
At
tention
Have all the electric tests carried by an Authorized
Titan Service Center.
i
The risk of damage rises with the age of the high-
pressure hose.
Titan recommends replacing high-pressure
hoses after 6 years.
7.7 BASIC ENGINE MAINTENANCE GAS ENGINE
• For detailed engine maintenance and technical
specications refer to the separate gasoline engine manual.
• All service to the engine should be performed by a dealer
authorized by the engine manufacturer.
• Use a premium quality motor oil. 10W30 is recommended
for general all temperature use. Other viscosities may be
required in other climates.
• Use only a (NGK) BP6ES or BPR6E spark plug. Gap the
plug to 0.028 to 0.031 In. (0.7 to 0.8 mm) Always use a
spark plug wrench.
DAILY
1. Check engine oil level, and ll as necessary.
2. Check gasoline level, and ll as necessary.
Always follow the fueling procedure outlined
earlier in this manual.
FIRST 20 HOURS
• Change engine oil.
EVERY 100 HOURS
• Change engine oil.
• Clean the sediment cup.
• Clean and re-gap the spark plug.
• Clean the spark arrestor.
WEEKLY
• Remove the air lter cover and clean the element. In
very dusty environments, check the lter daily. Replace
the element as needed. Replacement elements can be
purchased from your local engine manufacturer dealer.
ENGINE OPERATION AND SERVICE
• Clean and oil air lter pad on gasoline engine every 25
hours or once weekly. Do not permit the air intake screen
around the y wheel of the gas engine to load up with paint
or trash. Clean it regularly. The service life and eciency
of the gas engine model depends upon keeping the
gasoline engine running properly. Change the oil in the
engine every 100 hours. Failure to observe this may result
in engine overheating. Consult the engine manufacturer’s
service manual provided.
• To conserve fuel, service life, and eciency of the sprayer,
always operate the gasoline engine at the lowest RPM at
which it runs smoothly without laboring and delivers the
amount required for the particular painting operation.
Higher RPM does not produce higher working pressure.
The gasoline engine is connected to the hydraulic pump
by a pulley combination designed to produce full paint
delivery at maximum RPM.
• The warranty on gasoline engines or electric motors is
limited to the original manufacturer.