Product Manual

8
main areas of application
PowrBeast
2 MAIN AREAS OF APPLICATION
2.1
APPLICATION
The main area of application are thick layers of highly viscous
coating material for large areas and a high consumption of
material.
Priming and nal coating of large areas, sealing, impregnation,
construction sanitation, façade protection and renovation, rust
protection and building protection, roof coating, roof sealing,
concrete sanitation, as well as heavy corrosion protection.
EXAMPLES OF OBJECTS TO BE SPRAYED
Large-scale construction sites, cooling towers, bridges, sewage
treatment plants and terraces.
DO NOT use this equipment to spray water or
acid.
At
tention
Do not lift by cart handle when loading or
unloading.
Device is very heavy. Three-person lift is required.
2.2 COATING MATERIALS
PROCESSIBLE COATING MATERIALS
Diluting lacquers and paints or those containing solvents, two-
component coating materials, dispersion and latex paints.
No other materials should be used for spraying without Titan‘s
approval.
i
Pay attention to the Airless quality of the coating
materials to be processed.
VISCOSITY
The unit is able to process coating materials with up to 50.000
/ 65.000 mPas. If highly viscous coating materials cannot be
taken in or the performance of the unit is to low, the paint must
be diluted in accordance with the manufacturer‘s instructions.
i
Attention: Make sure, when stirring up with
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
COATING MATERIALS WITH ABRASIVE MATERIALS
These particles have a strong wear and tear eect on valves and
tips, but also on the spray gun. This impairs the durability of
these wearing parts considerably.
TWOCOMPONENT COATING MATERIAL
The appropriate processing time must be adhered to exactly.
Within this time rinse through and clean the unit meticulously
with the appropriate cleaning agents.
FILTERING
Sucient ltering is required for fault-free operation. The unit
is equipped with a suction lter, an insertion lter in the spray
gun and a high pressure lter on the unit. Regular inspection
of these lters for damage or soiling is urgently recommended.