Titan Pro - Acro 3D MASSAGE CHAIR OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS
Thank you for purchasing this product. Before you use it, please read the Operation Instructions in detail for the correct usage of this product, especially the important safety warnings. Keep the Operation Instructions properly for future reference. Note: Our company reserves the right to change and explain any product design without prior notice. Product colors are subject to the actual products.
Safety and Maintenance Safety and Maintenance 1.Important Safety Warnings ·Do not allow children to touch any movable part of this product. ·Use the well-grounded power supply unit suitable for this product. ·Pull out the plug after use or before cleaning to avoid any physical injury or damage to the product. ·Operate this product as instructed in this manual. ·Do not use any parts or accessories which are not recommended. ·Do not use this product outdoors.
Safety Warning Safety Warning Warning Warning When the legrest of the massage chair is lifted, nobody should apply pressure on the legrest to prevent the massage chair from falling forward which will damage this product or result in personal injuries. Do not remove or pull out the remote controller cable or the power cord in the standby or power-on state to avoid any damage to this product or accidental electric shock of a body part.
Safety Warning Name of Components Warning Before using the massage chair, remove any hard objects in your pocket(s) or any jewelry carried with you (e.g. key, watch, other similar portable hard objects) to avoid any damage to this product or physical injury during massage.
Function Function ·This product is designed with a set of intelligent 3D massage manipulators with silent design that can move up and down and extend from front to back. ·It is designed with automatic detection and micro-adjustment functions of the shoulder position, as well as automatic detection function of the human body curve and shiatsu massage points.
Introduction to the Remote Controller Introduction to the Remote Controller 1 2 13 3 4 14 5 6 7 15 8 9 10 16 17 11 12 10 1.Display: ·TFT color LCD showing the massage functions in the running state. 2.Switch: ·Turn on or off the massage. 3.AUTO key: ·Enter the automatic function mode selection interface. For more information about the functions, refer to Page 16 of the Operation Instructions. 4.Zero-gravity key: ·Adjust the angle of the massage chair for zero gravity.
Method of Usage Method of Usage I. Turn on the power supply of this product: 1) Lying angle adjustment ·After selecting any automatic function, the positions of the backrest and the leg rest will be adjusted to the preset angles. · After the angle is adjusted, the massage chair will automatically perform the shoulder position and body shape detection. Wait for completion of such detection (alternatively, press "OK" to skip the step).
Method of Usage Method of Usage Description Button Main Menu Manual Mode 20:00 Move the massage balls upward to a suitable shoulder position Auto program 20:00 Move the massage balls downward to a suitable shoulder position Manual Mode Knead> Range:Spot Width:2 OK 20:00 Other functions ·If you need to adjust the shoulder position after the massage program is started, you can directly select "Shoulder Position Adjustment" to enter the shoulder position adjustment interface; you can press "Up
Method of Usage Method of Usage Main Menu 20:00 Function Fast massage Auto program Manual Mode Comfortable massage Other functions Health check Description Experience all the massage effects quickly. The most comfortable massage experience. Relaxing massage Gentle and comfortable deep massage to relieve your body fatigue and relax the body. Stretching massage Stretch your legs and waist through the leg rest and the backrest to effectively remove fatigue,relieve joint pain and restore vitality.
Method of Usage Method of Usage Spine Massage Improve humpback and chest down; massage for each vertebra; care for the spine health; and improve the protrusion of intervertebral disc. Office Regimen For sitting in the office for a long period of time, this function can increase physical exercise by massage and improve the body functions. Sport Recovery Make you quickly recover from physical fatigue after exercise.
Method of Usage Method of Usage Main Menu 20:00 Other functions 20:00 Other functions Auto Mode 2 0:00 Auto program Manual Mode Upper air OFF Upper air OFF Lower air ON Lower air ON Other functions Back heat Back heat Health check Calf knead Calf knead 20:00 Comfort massage＞ Knead Customise Select the object with ▲▼ and press OK 01) Other functions - airbag massage for the upper body ·Airbag massage for the upper body: including airbag massage for the upper arms pressure, airbag m
Method of Usage Other functions Method of Usage Auto Mode 20:00 Upper air OFF Lower air ON 20:00 20:00 Comfort massage＞ Knead Back heat Calf knead Back speed Back intensity Air intensity Roll speed Adjustment Select the object with ▲▼ and press OK Shoulder Select the object with ◀▶ and press OK ·After the health detection is completed, select "Yes" or "No" again to select the exclusive massage program, and then press the "OK” key to confirm.
Method of Usage Method of Usage Main Menu 30:00 Auto program Manual Mode Memory Use Other functions Memory Save 02) Intelligent storage - call or cancel ·After entering the intelligent storage (call) interface, press "Up Key" or "Down Key" to select the massage function to be called. Press "OK" to enter the call or cancellation interface. ·Enter the intelligent storage (call) interface.
Method of Usage Method of Usage 01)Settings - language settings 03)Intelligent Voice Control ·Voice settings: including Chinese and English (the function has memory, that is, after such selection, power-off and restart, it will be the last selected state). ·Enter the settings interface. Press "Up Key" or "Down Key" to select the language settings. Press "Right Button" to enter the language settings.
Method of Usage Method of Usage 7)Massage adjustment Note: ·According to the remaining massage time, when the displayed time is not enough for the addition and subtraction of a certain time, the operation will not be displayed (the upper limit of the time display is 40 minutes). For example: If the display time of the remote controller is 39 minutes, the massage time adjustment range will be: -5min, -10min (+10min or +5min cannot be displayed).
Method of Usage Method of Usage 6.Lying angle adjustment button III.Introduction to Armrest Shortcut Keys Button Description Leg rest up button: Hold down the button to make the leg rest rise slowly. Release it to stop such action. Leg rest down button: Hold down the button to make the leg rest move downward slowly. Release it to stop such action. Backrest up button: Hold down the button to make the backrest rise slowly. Release it to stop such action.
Method of Usage Method of Usage 按键 描述 Power button: Short press this button to turn ON/OFF the massage. 3D intensity knob: adjust the massage intensity of 3D manipulator (counterclockwise indicates "-", while clockwise indicates "+"). The intensity range is Level 1-5. Press this button during massage, and all the massage actions will be suspended at once. (i.e. the massage chair will turn off after 20min). Then press this button again to restore all the previous massage actions.
Method of Usage Method of Usage V.Turn off the power and stop massage ·If the power button is pressed during massage, it will stop all the massage functions immediately, and the backrest, the legrest and massage chair manipulators will go back to the default positions. When the preset massage time is up, all the massage functions will be off. The backrest and the legrest will not go back to the default positions.
Method of Usage Product Specification IX.Floor Protection ·The prolonged heavy pressure on the massage chair may cause scratches on the floor. Thus, put a carpet or cushion on the floor where the massage chair is placed to avoid this damage.
