TITEGRAB Advanced Polymer Adhesive Initial Grab So Powerful it Instantly Holds Heavy Items – Even on Vertical Surfaces
Titebond® Ultimate TiteGrab Adhesive™ is an advanced polymer formula, specifically designed to decrease installation time of vertical applications, with double the initial bond strength of most other adhesives. It grabs heavy materials quickly, reducing time and amount of bracing, ultimately achieving a strong, permanent bond to porous and non-porous substrates. It bonds to vertical surfaces without slippage, eliminating the need for secondary support on most applications.
TYPICAL PROPERTIES • Viscosity: 3,600,000 cps • Working Time: 10 minutes, depending on temperature and humidity • Color: White • Flash Point: >212° F • Odor: Low • Application Temperature: 0° F - 120° F (60° F - 90° F for best results). Above 90° F, use additional support for 24 hours. • Calculated VOC: < 4 g/L (0.26% w/v) • Storage Life: 1 year LIMITATIONS • Not recommended for applications on PE, PP, PC, PMMA, PTFE, neoprene and bituminous substrates.
FOR BEST RESULTS • Do not use when temperature or materials are below 40° F. Do not use on plastic, rubber or asphalt. Not intended for use around pools, chlorides or for continuous submersion. Yellowing may occur in the dark. Not intended for direct contact with flames or fire brick. Extreme temperatures may affect load dependence of heavier materials. For mirrors and other heavy vertical applications, adhesive must be used with a permanent mechanical fastening system. Not suitable as joint sealant.