Use and Care Guide

VISIT WWW.TITEBOND.COM FOR THE

MOST UP-TO-DATE PRODUCT INFORMATION

FOR BEST RESULTS

• Do not use when temperature or materials are below 40° F. Do not

use on plastic, rubber or asphalt. Not intended for use around pools,

chlorides or for continuous submersion. Yellowing may occur in

the dark. Not intended for direct contact with ﬂames or ﬁre brick.

Extreme temperatures may affect load dependence of heavier

materials. For mirrors and other heavy vertical applications, adhesive

must be used with a permanent mechanical fastening system. Not

suitable as joint sealant. Not paintable with alkyd resin paints.

Porous surfaces may require a primer. Adhesion tests prior to

application are recommended. For additional questions or

recommendations, please contact Technical Service at

1.800.347.4583 or visit us at Titebond.com.

ORDERING INFORMATION

• 9.5 ﬂ. oz. Cartridge / 12 Units per Package

132 Packages per Pallet / 13.64 lbs.

UPC# 037083067019

Part# 6701

FIRST AID. If exposed or concerned: Get medical attention. Store in original container protected

from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials and

food and drink. Dispose of contents and container is accordance with local, regional, national,

and international regulations.

WARNING. Suspected of damaging fertility or the unborn child. Obtain special instructions before use.

Do not handle until all safety precautions have been read and understood. Avoid contact with skin and

clothing. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Prolonged or

repeated contact may dry skin and cause irritation. Wash thoroughly after handling.

IMPORTANT NOTICE. Our recommendations, if any, for the use of this product are based on tests

believed to be reliable. Furthermore, nothing contained herein shall be construed as a recommendation

to use any product in conflict with existing laws and/or patents covering any material or use.