Manualshelf

User's Manual

ManualsBrandsTOA Electronics ManualsNetwork CablesTOA Electronics Network Cables NX-100
31323334353637383940
3-13
Chapter 3: SYSTEM SETTINGS (NX-100 SETUP PROGRAM)
6. SYSTEM SETTING TOOL
Setting data can only be updated after the unit's IP address has been correctly set by way of either the
Installation Setting Program's Unit Scanning Tool or a browser.
6.1. Screen Description
Clicking on [System Setting] on the Installation Setting Program's initial screen displays the following window.
If the unit to be set is selected, its currently set contents are displayed in the right-side setting form.
(1) Name
Displays the unit names programmed into the system.
(2) IP address
Displays the unit IP addresses programmed into the system.
(3) Web server port
Displays the port number of the web server.
(4) Unit type
Displays either type of unit NX-100 or NX-100S.