Instruction Manual

ManualsBrandsToa ManualsReceivers and AmplifiersTA-102

OPERATING INSTRUCTIONS

INFORMATION AMPLIFIER

TA-102

1. SAFETY PRECAUTIONS ............................. 2

2. GENERAL DESCRIPTION ........................... 4

3. EACH PART NAME AND FUNCTIONS

Top Panel ...................................................... 4

Rear Panel .................................................... 4

4. INSTALLATION ............................................ 5

5. CONNECTIONS ............................................ 6

6. OPERATIONS

6.1. When using the microphone .................. 7

6.2. When using the AUX input ..................... 7

7. SPECIFICATIONS ........................................ 7

NFORMATION AM

PLIFIER

A-102

Please follow the instructions in this manual to obtain the optimum results from this unit.

We also recommend that you keep this manual handy for future reference.

TABLE OF CONTENTS

Summary of content (8 pages)

PAGE 1
OPERATING INSTRUCTIONS INFORMATION AMPLIFIER TA-102 IN R O F R IE F LI P M A N 2 IO 0 T -1 A A M T MIC AU X PO WE R TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................. 2 2. GENERAL DESCRIPTION ........................... 4 3. EACH PART NAME AND FUNCTIONS Top Panel ...................................................... 4 Rear Panel .................................................... 4 6. OPERATIONS 6.1. When using the microphone .................. 7 6.2.
PAGE 2
1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference.
PAGE 3
CAUTION ■ When Installing the Unit ■ When the Unit is in Use • Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock. • Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage. • When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself.
PAGE 4
2. GENERAL DESCRIPTION Rated at 10 W of output, TOA's TA-102 amplifier is ideal for simple paging in such places as reception desks, waiting rooms, and coffee shops. Its internal single-tone chime generator can be operated by using the optional paging microphone PM-660D. 3. EACH PART NAME AND FUNCTIONS [Top Panel] 1 Power switch [POWER] Power is switched on and off with each depression of this switch. 2 Power indicator lamp Lights when the power is switched on, and is extinguished when switched off.
PAGE 5
4. INSTALLATION • Use a power source of 220 VAC, 50/60 Hz. • Connect the signal grounding terminal to the ground. • Avoid installing the unit in humid, dusty or vibratory locations as well as locations where the unit is exposed to steam or oil-contaminated smoke. • Do not block vents provided in both the top and bottom surfaces. • When mounting on the wall, fix securely as illustrated below.
PAGE 6
5. CONNECTIONS Signal grounding terminal Connect this terminal to the ground. AUX input jack (RCA pin jack) • Connect this jack to the line output of a radio tuner, cassette tape player or CD player. • An RCA pin plug is necessary for connection. • Stereo outputs are converted into monaural outputs. Microphone DIN jack • Connect this jack to an optional paging microphone PM-660D. • A 5-pin DIN plug is necessary for connection.
PAGE 7
6. OPERATIONS First, check to confirm that the power switch is set to OFF, and each volume control to the 0 position after connection completion. Then, connect the power cord to the wall outlet and set the power switch to ON. The power indicator lamp will light. 6.1 When using the microphone When the microphone is equipped with a talk switch, turn on the switch and then adjust the volume rotating the microphone volume control slowly. 6.
PAGE 8