User Manual
EN - 36
CLEANING AND MAINTENANCE
Check before cleaning the dishwasher if it’s is turned o. Unplug the dishwasher and turn o the tap.
Clean the outside of the dishwasher with a damp cloth. To prevent odors from forming within the dishwasher, clean the seals of
the door regularly with a so damp cloth.
To prevent the dishwasher from geng clogged, we advise to clean the dishwasher regularly with a special cleanser.
Fill the detergent reservoir with detergant, select a cycle with a high temperature and start the program. If this is insucient,
use a special cleanser for dishwasher and follow the instrucons on the packaging.
Clean the lters and the spray arm once a week.
CLEANING THE FILTERS
Check once a week if there is any residue on the lters. Remove the lters and clean them thoroughly under the water tap.
The lter system consist of three components:
•
•
•
A
B
C
Open
C
B
A
C
B
A
1. To remove the lters, turn the lter (B) an-clockwise
2. Pull it (B and C) upwards.
3. Pull the coarse lter (C) from the ne lter (B) and clean both parts with warm water
using a dishwashing brush.
4. Take the sieve (A) out of the dishwasher and clean it with warm water and if needed a
dishwashing brush. Place the sieve back in the dishwasher.
5. Place the coarse lter in the ne lter with the markings allined. Re-t the lters in the
sieve and turn it clockwise to xe it.
• Do not use the dishwasher when there are no lters in place.
• Incorrect ng of one the lters will result in the dishwasher no longer delivering maximum performance.
• Make sure the lters are clean. This ensures proper funconing of the dishwasher.
CLEANING THE SPRAY ARM
Check the nozzles of the spray arm regularly for waste. Waste can block the nozzles and bearing in the spray arm. Remove the
clogging in the spray arm and clean them with warm water.
• Remove the spray arm by pulling it upwards.
• Clean the spray arm with warm water.
• Make sure the spray arm is perfectly locked when reng the spray arm.