User Manual
EN - 38
1. The dishwasher is level and xed properly.
2. The inlet valve is open.
3. The ll hose connecons are fully ghtened and not leaking.
4. The appliance is plugged in.
5. The drain hose is properly placed.
6. All packing materials and prinngs should be taken out of the dishwasher.
TROUBLESHOOTING
FAULTCODE
DESCRIPTION CHECK
The SNEL30 light ickers fast Inadequate water supply. • Check whether the tap is fully open and there nothing
blocking the water mains.
• Close the tap, remove the input hose and check whether it
is clogged.
• Start the dishwasher again. Contact the customer service
department when the error remains.
The indicator lights SNEL30 and
DELICATE icker fast
The dishwasher is not
reaching the required
temperature.
• The heang element is not working. Contact the customer
service department when the error remains.
The ECO light ickers fast
Overow. • A part of the dishwasher leaks.
• Close the tap.
• Contact the customer service department.
The indicator lights BASIC, ECO
and SNEL30 icker fast
Failure in the electronics. • Turn the dishwasher o and contact the customer service
department.
Repairing the machine yourself or having it repaired by a non-professional could cause severe safety risks for the user of
the machine and will aect the warranty.
• Check if the plug is connected.
• Check the fuse in the fuse box.
• Make sure the water tap is open.
• Make sure the door of the dishwasher is closed properly.
• Check whether the dishwasher is turned on with the On/o buon.
• Check whether the water inlet hose and lters aren’t clogged.
• The On/ o buon is not released yet.
• Detergent has been added when the reservoir was damp.
• The water drain hose is clogged or twisted.
• The lters are clogged.
• The cycle has not nished yet.
• Power failure.
• Water supply failure.
• The program can be paused.
• The dishwasher is not loaded properly.
• One of the spray arms is hing the dishes.