Use and Care Manual

3.2.2 Check:
-Oil level in engine
-Fuel level
-Condition of air cleaner
-Tightness of external fasteners
-Condition of fuel lines
3.3 TO Start (Fig.1)
3.3.1 Open fuel valve by moving lever to the right (a1).
Note: If engine is cold, move choke lever to close position (b1). If engine is hot, set choke
to open position (b2).
3.3.2 Turn engine switch to "ON" (e1).
3.3.3 Open throttle by moving it slightly to le (d1).
3.3.4 Pull starter rope (c).
Note: If the oil level in the engine is low, the engine will not start. If this happens, add oil to
engine. Some engines are equipped with an oil alert light that will come on while pulling
the starter rope.
3.3.5 Open choke as engine warms (b2).
3.3.6 Open throttle fully to operate.
8
a1
a2
b2
b1
OFF ON
c2
c3
c1
d2
d1
e1
Fig. 1