Manualshelf

Instructions / Assembly

ManualsBrandsTommy Docks ManualsBoat Docks20 ft. Roll-In-Dock Straight Aluminum Frame With Removable Cedar Decking Complete Dock Package
45678910111213
13
12
Use the Hex Bit to fully tighten the Stainless Steel Tapered Head Screw while holding in place the
Stainless Steel Nylon Locknut with a 3/8” Box End Wrench.
NOTE: When assembling the frame components, if you encounter holes that do not line up exactly, it
is acceptable to use a drill to ream out the holes slightly for the fasteners to fit appropriately.
Use the Hex Bit to fully tighten the Stainless Steel Tapered Head Screw while holding in place the
Stainless Steel Nylon Locknut with a 3/8” Box End Wrench.
NOTE: When assembling the frame components, if you encounter holes that do not line up exactly, it
is acceptable to use a drill to ream out the holes slightly for the fasteners to fit appropriately.
Hex
Bit
Stainless Steel
Tapered Head Screw
3/8” Box
End Wrench
Stainless Steel
Nylon Locknut
3/8” Box
End Wrench
Hex
Bit
Stainless Steel
Nylon Locknut
Stainless Steel
Tapered Head Screw