Instructions / Assembly

15
14
Slide the last board into the frame and you will be able to flex the remaining corner connection to
snap in the last deck board (14a). You may now push the remaining corner together (14b).
The final top of the frame corner connection is made by installing the (2) Self Tapping Screws
provided (15a). Fit corner together tightly and tighten using 5/16” Driver Bit (15b).
14b
14a
2x
15a 15b
Self
Tapping
Screw
5/16”
Driver Bit
NOTE: When assembling the frame
components, if you encounter holes that
do not line up exactly, it is acceptable to
use a drill to ream out the holes slightly
for the fasteners to fit appropriately.