Instructions / Assembly

12
11
In order to determine spacing for the Deck Boards, use a Pencil and a Measuring Tape and measure
along each Side Rail every 6” from the End Rail. The final mark should be at the very end of the other
End Rail. NOTE: If you are assembling a 4’ x 8’ Cedar Deck Kit, sixteen (16) boards will be installed.
If you are assembling a 4’ x 10’ Cedar Deck Kit, twenty (20) Deck Boards will be installed.
Lower the first Deck Board onto the frame at one end (12a). The first Deck Board should be offset
from the end of the End Rail 1/2” (12b).
Make mark every 6”
6”
11
End Rail
Side Rail
Side Rail
Side Rail
12a 12b
1/2”
End Rail
Deck Board