Installation Guide

1
We recommend you level your shoreline with Blocks. Level shoreline Blocks will stabilize your dock
and ensure a good start. While on shore, install Brackets on section (refer to dock layout and bracket
installation sheets for correct bracket location and installation). We recommend the use of sawhorses
or other suitable level work area for hardware installation. When installing Brackets for a tee section,
measure correct distance of mating docks (standard width is 47-3/4”).
2
Install predetermined length of Post through Brackets (2a) and temporarily tighten Bracket
Adjusting Bolts (2b) leaving 3” of post below the bottom of each Bracket (2c).
2a
Post
Bracket
3”
2c
2b
3”
Bracket
Adjusting Bolt
3/4”