User manual

30
12. Technical data
Rated voltage ..............................................................................230 V/AC, 50Hz
Rated power input .......................................................................800 W
Speed, n0 ....................................................................................780 /min
Chuck type ...................................................................................SDS Plus
Drilling capacity ...........................................................................Steel: 13mm
Concrete: 30mm
Wood: 30mm
Level of acoustic pressure LpA ....................................................Hammer drilling mode: 86.76 dB(A)
Chiselling mode: 90.20 dB(A)
K=3 dB(A)
Level of acoustic power LwA ....................................................... Hammer drilling mode: 97.76 dB(A)
Rotary hammer mode: 101.20 dB(A)
K=3 dB(A)
Level of vibration (K=1.5 m/s2) ....................................................For hammer drill:
Main handle: αhHD= 14.234 m/s²
Auxiliary handle: αhHD= 13.645 m/s²
For chisel hammer:
Main handle: αhcheq= 6.092 m/s²
Auxiliary handle: αh,ID= 7.691 m/s²
a) Note
• The declared vibration total value has been measured in accordance with a standard test method and may be used
for comparing one tool with another.
• The declared vibration total value may also be used in a preliminary assessment of exposure.
b) Warning
• The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
• Avoid vibration risk.
Wear glove during operation.
Limit operating time and shorten trigger time.