Manual
Table Of Contents
- 2 Einführung
- 3 Bestimmungsgemäße Verwendung
- 4 Lieferumfang
- 5 Zubehör
- 6 Aktuelle Bedienungsanleitungen
- 7 Symbol-Erklärung
- 8 Sicherheitshinweise
- 8.1 Allgemeine Sicherheitsinformationen
- 8.2 Sicherheit im Arbeitsbereich
- 8.3 Elektrische Sicherheit
- 8.4 Persönliche Sicherheit
- 8.5 Verwendung und Pflege
- 8.6 Verwenden und Warten von akkubetriebenen Elektrowerkzeugen
- 8.7 Service
- 8.8 Besondere Sicherheitsanweisungen
- 8.9 Ursachen für Rückschlag und Möglichkeiten zum Vermeiden
- 8.10 Verringerung von Geräuschen und Vibrationen
- 8.11 Restrisiken
- 8.12 Sicherheitsanweisungen für Akkus
- 8.13 Sicherheitsanweisungen für das Ladegerät
- 8.14 Wichtige Informationen zum Akku
- 9 Produktübersicht
- 10 Montage
- 11 Betrieb
- 12 Vor dem Arbeiten mit der Kettensäge
- 13 Arbeiten mit der Kettensäge
- 14 Nach dem Arbeiten mit der Kettensäge
- 15 Reinigung
- 16 Wartung
- 17 Transport und Aufbewahrung
- 18 Problembehandlung
- 19 Entsorgung
- 20 Konformitätserklärung (DOC)
- 21 Technische Daten
- 2 Introduction
- 3 Intended use
- 4 Delivery content
- 5 Accessories
- 6 Up-to-date operating instructions
- 7 Description of symbols
- 8 Safety instructions
- 8.1 General safety information
- 8.2 Work area safety
- 8.3 Electrical safety
- 8.4 Personal safety
- 8.5 Use and care
- 8.6 Using and maintaining battery-powered tools
- 8.7 Service
- 8.8 Special safety instructions
- 8.9 Causes of kickback and ways to prevent it
- 8.10 Reduction of noise and vibrations
- 8.11 Remaining risks
- 8.12 Safety instructions for battery
- 8.13 Safety instructions for charger
- 8.14 Important information on battery
- 9 Product overview
- 10 Assembly
- 11 Operation
- 12 Before working with the saw
- 13 Working with the saw
- 14 After working with the saw
- 15 Cleaning
- 16 Maintenance
- 17 Transport and storage
- 18 Troubleshooting
- 19 Disposal
- 20 Declaration of conformity (DOC)
- 21 Technical data
48
15 Cleaning
WARNING
Accidental starting can cause serious personal injury.
Always remove battery before cleaning.
15.1 Cleaning the chain saw
1. Remove any debris.
2. Wipe the appliance with a damp cloth.
15.2 Cleaning bar lubrication slot
Important: Clean the bar with plastic tools. Never use metal tools.
1. Remove the bar.
2. Clear the lubrication slot in the bar with a suitable tool.
3. Fit the bar.
16 Maintenance
WARNING
Accidental starting can cause serious personal injury.
Always remove battery before maintaining.
Important:
– Do not carry out maintenance or adjustments not described in these instructions.
– Incorrect maintenance can result in personal injury or material damage.
16.1 Lubricating the sprocket
The bar sprocket should be lubricated at intervals of 25 working hours, or once a week during intensive use.
1. Clean the sprocket.
2. Press grease from the nozzle of a suitable grease gun into the lubrication hole until it comes out by the edge of
the bar. A grease gun with a slim nozzle simplies effective lubrication.
CAUTION! Chain is sharp. Wear protective gloves.
3. Put on protective gloves.
4. Pull round the chain by hand. Repeat until all of the sprocket has been lubricated.