Manual
Table Of Contents
- 2 Einführung
- 3 Bestimmungsgemäße Verwendung
- 4 Lieferumfang
- 5 Zubehör
- 6 Aktuelle Bedienungsanleitungen
- 7 Symbol-Erklärung
- 8 Sicherheitshinweise
- 8.1 Allgemeine Sicherheitsinformationen
- 8.2 Sicherheit im Arbeitsbereich
- 8.3 Elektrische Sicherheit
- 8.4 Persönliche Sicherheit
- 8.5 Verwendung und Pflege
- 8.6 Verwenden und Warten von akkubetriebenen Elektrowerkzeugen
- 8.7 Service
- 8.8 Besondere Sicherheitsanweisungen
- 8.9 Ursachen für Rückschlag und Möglichkeiten zum Vermeiden
- 8.10 Verringerung von Geräuschen und Vibrationen
- 8.11 Restrisiken
- 8.12 Sicherheitsanweisungen für Akkus
- 8.13 Sicherheitsanweisungen für das Ladegerät
- 8.14 Wichtige Informationen zum Akku
- 9 Produktübersicht
- 10 Montage
- 11 Betrieb
- 12 Vor dem Arbeiten mit der Kettensäge
- 13 Arbeiten mit der Kettensäge
- 14 Nach dem Arbeiten mit der Kettensäge
- 15 Reinigung
- 16 Wartung
- 17 Transport und Aufbewahrung
- 18 Problembehandlung
- 19 Entsorgung
- 20 Konformitätserklärung (DOC)
- 21 Technische Daten
- 2 Introduction
- 3 Intended use
- 4 Delivery content
- 5 Accessories
- 6 Up-to-date operating instructions
- 7 Description of symbols
- 8 Safety instructions
- 8.1 General safety information
- 8.2 Work area safety
- 8.3 Electrical safety
- 8.4 Personal safety
- 8.5 Use and care
- 8.6 Using and maintaining battery-powered tools
- 8.7 Service
- 8.8 Special safety instructions
- 8.9 Causes of kickback and ways to prevent it
- 8.10 Reduction of noise and vibrations
- 8.11 Remaining risks
- 8.12 Safety instructions for battery
- 8.13 Safety instructions for charger
- 8.14 Important information on battery
- 9 Product overview
- 10 Assembly
- 11 Operation
- 12 Before working with the saw
- 13 Working with the saw
- 14 After working with the saw
- 15 Cleaning
- 16 Maintenance
- 17 Transport and storage
- 18 Troubleshooting
- 19 Disposal
- 20 Declaration of conformity (DOC)
- 21 Technical data
50
18 Troubleshooting
Problem Possible cause Action
The chain saw will not start. The chain brake handle has
released (handle in front position).
Reset the chain brake handle.
The battery is not correctly
installed.
Check the battery.
The chain and/or bar get hot and
produce smoke.
The oil tank is empty. Fill up with oil.
The oil hole in the bar is blocked. Clear the oil hole and chain slot.
The chain is too tight. Check and slacken the chain.
The sprocket on the bar needs
lubricating.
Lubricate the sprocket on the bar.
The saw does not saw well. The chain is tted backwards. Check the chain and t in the cor-
rect direction of rotation.
The chain is worn. Have the chain sharpened by a
professional.
The chain is dry. Impurities in the oil tank. Empty the oil tank and ll with
new oil.
The ventilation hole in the oil ller
cap is clogged.
Clear the ventilation hole.
Fouling in the bar. Clear and clean the bar.
The chain brake does not trip. Problem with the release mecha-
nism in the chain brake handle.
Allow an authorised service centre
to examine the chain saw.