Manual
Table Of Contents
- 2 Einführung
- 3 Bestimmungsgemäße Verwendung
- 4 Lieferumfang
- 5 Zubehör
- 6 Aktuelle Bedienungsanleitungen
- 7 Symbol-Erklärung
- 8 Sicherheitshinweise
- 8.1 Allgemeine Sicherheitsinformationen
- 8.2 Sicherheit im Arbeitsbereich
- 8.3 Elektrische Sicherheit
- 8.4 Persönliche Sicherheit
- 8.5 Verwendung und Pflege
- 8.6 Verwenden und Warten von akkubetriebenen Elektrowerkzeugen
- 8.7 Service
- 8.8 Besondere Sicherheitsanweisungen
- 8.9 Ursachen für Rückschlag und Möglichkeiten zum Vermeiden
- 8.10 Verringerung von Geräuschen und Vibrationen
- 8.11 Restrisiken
- 8.12 Sicherheitsanweisungen für Akkus
- 8.13 Sicherheitsanweisungen für das Ladegerät
- 8.14 Wichtige Informationen zum Akku
- 9 Produktübersicht
- 10 Montage
- 11 Betrieb
- 12 Vor dem Arbeiten mit der Kettensäge
- 13 Arbeiten mit der Kettensäge
- 14 Nach dem Arbeiten mit der Kettensäge
- 15 Reinigung
- 16 Wartung
- 17 Transport und Aufbewahrung
- 18 Problembehandlung
- 19 Entsorgung
- 20 Konformitätserklärung (DOC)
- 21 Technische Daten
- 2 Introduction
- 3 Intended use
- 4 Delivery content
- 5 Accessories
- 6 Up-to-date operating instructions
- 7 Description of symbols
- 8 Safety instructions
- 8.1 General safety information
- 8.2 Work area safety
- 8.3 Electrical safety
- 8.4 Personal safety
- 8.5 Use and care
- 8.6 Using and maintaining battery-powered tools
- 8.7 Service
- 8.8 Special safety instructions
- 8.9 Causes of kickback and ways to prevent it
- 8.10 Reduction of noise and vibrations
- 8.11 Remaining risks
- 8.12 Safety instructions for battery
- 8.13 Safety instructions for charger
- 8.14 Important information on battery
- 9 Product overview
- 10 Assembly
- 11 Operation
- 12 Before working with the saw
- 13 Working with the saw
- 14 After working with the saw
- 15 Cleaning
- 16 Maintenance
- 17 Transport and storage
- 18 Troubleshooting
- 19 Disposal
- 20 Declaration of conformity (DOC)
- 21 Technical data
52
20 Declaration of conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product (AKS-200) con-
forms to the following directive(s):
Machinery Directive 2006/42/EC
EN 60745-1:2009/A1:2010
EN 60745-2-13:2009/A1:2010
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of conformity in the
available languages.
21 Technical data
21.1 Power supply
Power supply ................................ 20 V Li-Ion battery pack
Battery Usage
Item No. 1881809 20 V 2 Ah Li-ion approx. 60 cuts
Item No. 1881810 20 V 4 Ah Li-ion approx. 120 cuts
Item No. 2331500 20 V 5 Ah Li-ion approx. 150 cuts
21.2 Chain saw
Chain speed (no load) .................. 6 m/s
Oil tank volume ............................. 180 ml
Bar length ..................................... 254 mm (10”)
21.3 Chain
Pitch .............................................. 3/8” (9.525 mm)
Drive links ..................................... 40
21.4 Sound pressure and noise
Sound pressure level, LpA ............ 86.9 dB(A), K=3 dB
Sound power level, LwA* .............. 97 dB(A), K=2.37 dB
Sound power level, LwA** ............ 99 dB(A)
Vibration level*** .......................... 3.21 m/s², K=1.5 m/s²
Vibration level**** ......................... 3.79 m/s², K=1.5 m/s²
*Measured, **Guaranteed
***Front handle, ****Back handle