Manual
Table Of Contents
- 2 Einführung
- 3 Bestimmungsgemäße Verwendung
- 4 Lieferumfang
- 5 Zubehör
- 6 Aktuelle Bedienungsanleitungen
- 7 Symbol-Erklärung
- 8 Sicherheitshinweise
- 8.1 Allgemeine Sicherheitsinformationen
- 8.2 Sicherheit im Arbeitsbereich
- 8.3 Elektrische Sicherheit
- 8.4 Persönliche Sicherheit
- 8.5 Verwendung und Pflege
- 8.6 Verwenden und Warten von akkubetriebenen Elektrowerkzeugen
- 8.7 Service
- 8.8 Besondere Sicherheitsanweisungen
- 8.9 Ursachen für Rückschlag und Möglichkeiten zum Vermeiden
- 8.10 Verringerung von Geräuschen und Vibrationen
- 8.11 Restrisiken
- 8.12 Sicherheitsanweisungen für Akkus
- 8.13 Sicherheitsanweisungen für das Ladegerät
- 8.14 Wichtige Informationen zum Akku
- 9 Produktübersicht
- 10 Montage
- 11 Betrieb
- 12 Vor dem Arbeiten mit der Kettensäge
- 13 Arbeiten mit der Kettensäge
- 14 Nach dem Arbeiten mit der Kettensäge
- 15 Reinigung
- 16 Wartung
- 17 Transport und Aufbewahrung
- 18 Problembehandlung
- 19 Entsorgung
- 20 Konformitätserklärung (DOC)
- 21 Technische Daten
- 2 Introduction
- 3 Intended use
- 4 Delivery content
- 5 Accessories
- 6 Up-to-date operating instructions
- 7 Description of symbols
- 8 Safety instructions
- 8.1 General safety information
- 8.2 Work area safety
- 8.3 Electrical safety
- 8.4 Personal safety
- 8.5 Use and care
- 8.6 Using and maintaining battery-powered tools
- 8.7 Service
- 8.8 Special safety instructions
- 8.9 Causes of kickback and ways to prevent it
- 8.10 Reduction of noise and vibrations
- 8.11 Remaining risks
- 8.12 Safety instructions for battery
- 8.13 Safety instructions for charger
- 8.14 Important information on battery
- 9 Product overview
- 10 Assembly
- 11 Operation
- 12 Before working with the saw
- 13 Working with the saw
- 14 After working with the saw
- 15 Cleaning
- 16 Maintenance
- 17 Transport and storage
- 18 Troubleshooting
- 19 Disposal
- 20 Declaration of conformity (DOC)
- 21 Technical data
53
Always wear ear protection.
The declared values for vibration and noise, which have been measured according to a standardised test method, can
be used to compare different tools with each other and for a preliminary assessment of exposure. The measurement
values have been determined in accordance with EN60745-2-13:2009/A1:2010.
WARNING!
The actual vibration level when using power tools may differ from the specied maximum value, depending on how
the tool is used.
It is therefore necessary to determine which safety precautions are required to protect the user, based on an estimate
of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool
is switched off and when it is idling, in addition to the start-up time).
21.5 Others
Operating temperature ................. +5 to +40 °C
Operating humidity ....................... < 85 % RH
Storage temperature ..................... +5 to +40 °C
Storage humidity ........................... < 85 % RH
Dimensions (L x W x H) ................ 650 x 230 x 230 mm
Weight .......................................... approx. 3.43 kg