- Top Innovations, Inc. Sewing Machine Owner's Manual SP-402

5
NOTE:
Even if you have sewn before, these instructions will make
your first use much easier!
TABLE OF CONTENTS
PAGE
Handy Reference Guide.................................................................2
Getting Ready to Sew ....................................................................6
Winding the Bobbin ........................................................................7
Inserting the Wound Bobbin...........................................................9
Threading the Machine ..................................................................10
Raising the Bobbin Thread.............................................................12
Sewing a Broken Seam..................................................................13
Securing a Seam............................................................................14
Free Arm Sewing............................................................................14
Adjusting Tension...........................................................................15
Changing Needles..........................................................................16
Bobbin Case Replacement ............................................................17
Performance Checklist ...................................................................18
Limited Warranty ............................................................................19
IMPORTANT SAFEGUARDS
Before connecting machine, be sure that the voltage on the AC adaptor
matches your electrical supply
Always disconnect the foot pedal or AC adaptor when changing needles,
removing the bobbin, or cleaning the QUIKSTITCH
Always disconnect the AC adaptor whenever the QUIKSTITCH is
unattended
Work carefully and watch the sewing area to avoid the needle during
operation
Do not pull the fabric while sewing as the needle may bend, break or
cause other damage
Insure that the machine is threaded correctly before sewing
The QUIKSTITCH is a sewing machine and is not intended for garment
construction