Operation Manual

Butler 1200/1210

ENGLISH

4.4 Activate/deactivate handsfree function (for Butler 1210 only)

This function allows you to communicate without having to pick up the handset. When you are

on the phone, press the Up/Handsfree key / to activate the handsfree function.

Press the same button to deactivate the handsfree function.

Note : When you are calling in handsfree mode and you want to change the volume, press the Volume

button .

Attention !! When you use the handsfree function for a long time, the batteries will be empty quickly !

4.5 Transferring a call to another handset

• You have an external caller on the line.

• Press the Programming key .

• ‘INTERCOM’ appears on the display.

• Press the Programming key .

• The external call is now on hold.

• ‘INT‘ appears on the display.

• Dial the number of the handset to which you would like to transfer the call.

• If the handset dialled is answered, you can have an internal conversation. Press the Line key

and the external call is transferred.

• If the handset dialled is not answered, press the Down key to speak to the external caller

again.

4.6 Out of Range Warning

If the handset is out of range of the base unit, a warning signal will sound.

• ‘SEARCHING’ appears on the display and the symbol blinks on the display.

• Move closer to the base unit.

• As soon as you are back within range of the base unit, a signal sounds and the symbol

stops blinking.

4.7 Setting the speaker volume

Use the Volume/Ringer key / to set the volume of the speaker (handset). You can choose

from 5 levels. The telephone is set to level ‘3’ by default.

During a call, you can change the volume as follows:

• Press the Volume/Ringer key / .

• The volume level currently set appears on the display.

• Use the number keys to set the desired level (1-5).

• Press the Volume/Ringer key / to conﬁrm your selection.

Note : You have 8 seconds to set the desired volume; if you do not, the telephone returns to standby

mode and the volume remains unchanged.

4.8 Call Duration Indicator on the Display

As soon as you press the Line key the call duration appears on the display (minutes-seconds).

E.g. “ 01-20 “ for 1 minute and 20 seconds.

The call duration remains visible on the display for 5 seconds after each call.