Operation Manual

Butler 1200/1210

ENGLISH

4.20 The R key (ﬂash)

Press the Flash key ‘R’ to use certain services such as “call waiting” (if your telephone company

offers this feature); or to transfer calls if you use a telephone exchange (PABX). The Flash key

‘R’ is a brief interruption of the line. You can set the ﬂash time to 100ms or 250ms. This is set

to 100ms by default! However, if your system requires a longer ﬂash time, do the following:

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘SETTING’ appears on the display

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘RECALL’ appears on the display.

• Press the Programming key .

• Press the Up or Down key repeatedly to select the ﬂash time:

- SHORT = 100ms

- LONG = 250ms

• Press the Programming key to conﬁrm your selection.

4.21 Changing the PIN code

Certain functions are only available if you know the PIN code of the telephone. Thanks to this

secret code, settings are displayed that only you can change. The PIN code has 4 digits. The

default PIN code setting is ‘0000’. If you would like to change the default PIN code and set

your own secret code, do the following:

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘PIN CODE’ appears on the display.

• Press the Programming key .

• ‘OLD CODE’ appears on the display.

• Enter the old PIN code. Use the number keys.

• Press the Programming key .

• ‘NEW CODE’ appears on the display.

• Enter the new PIN code in. Use the number keys.

• Press the Programming key .

• ‘AGAIN’ appears on the display.

• Enter the new PIN code again. Use the number keys.

• Press the Programming key .

• You hear a conﬁrmation tone. The new PIN code has been set.

Caution : Do not forget your personal PIN code. If you do, you have to restore the default settings

(reset – see section 4.28).

4.22 Subscribing a handset to a Butler 1000, 1010, 1210 base unit

In order to be able to make and receive telephone calls, a new handset has to be subscribed to

the base unit. You can subscribe 5 handsets to one base unit. By default, each handset is sub-

scribed as handset 1 on the base unit upon delivery (base unit 1).

!!! You only need to subscribe the handset if: !!!

• the handset subscription has been removed from the base unit (e.g. for reinitialisation)

• you want to subscribe a different handset to this base unit.